Publicité
In the event a turbine gets blocked due to the
accumulation of debris, wires or fibers, remove the
suction base and clean the inside of the pump.
1. Loosen the screws that hold it in place, and remove
the suction base (8);
2. Clean the turbine and turbine chamber with running
water;
3. Replace the suction base and tighten the screws that
hold it in place;
For your own safety, if either the turbine or electrical
parts of the pump (power cord or plug and switch) need
to be repaired, these operations should only be
performed by qualified technicians.
Storage
Once the pump and its accessories have been cleaned,
store the pump in a stable, safe position, in a dry,
temperate place. Avoid storing it in temperatures that
are either too high or too low.
Protect the pump from direct light. If possible, keep the
pump in a dark place.
Do not store the pump in plastic bags, as they could
produce humidity.
Keep away from children.
ENVIRONMENTAL POLICY
The packaging has been manufactured using
recyclable materials, which you can dispose of at
your local recycling collection points.
Never dispose of electric machinery in your
household waste!
According to European Directive 2002/96 / EC, used
power tools must be collected separately and recycled.
You can get information regarding the disposal of used
pumps and oil from your local recycling authority.
CUSTOMER SUPPORT
Telephone no.:
Email address:
Website:
+351 256 331 080
sat@centrallobao.pt
www.centrallobao.pt
27
Publicité
