FAR RTG925EW G Manuel D'instructions page 47

ENGLISH
• Door reversing
The side to which the refrigerator door opens
can be altered on the right side to the left, if
place of installation so requires.
1. Remove the screws (6) securing the top
(7) and remove it.
2. Remove the two screws (1) securing the
upper hinge (5) to the structure and remo
3. Lift the door and place it on a padded surface
to prevent scratching.
4. Remove the two screws (8) securing the lower
hinge (2) and remove.
5. Remove the front foot (4) and move it to the
right.
6. Before inserting the lower hinge (2), remove
the plug (9) and reverse the direction of
lower hinge (2). Then install the lower hinge (2) on
the left side of the lower structure with
screws (8).
7. Fit the plug (9) in the lower hinge (2).
8. Place the door in the correct position
that this is supported on the lower hinge (2).
GB-12
30cm
50-75mm
v
ensuring
30cm
the
cover
right
e . t i
the
two