Error Messages & Protections - vapanion POLAR Manuel D'utilisation

VAPANION
ERROR MESSAGES & PROTECTIONS
POLAR
10-Second Safety Feature
If you press and hold the fire button for more than 10 seconds, the current delivery will automatically
switch off. The error code "10S OVER TIME" is displayed on the screen.
No Atomizer Head detected
The device could not detect a suitable atomizer head. The error code "CHECK ATOMIZER" is display-
ed on the screen. Please install a suitable atomizer head or check that it is properly connected.
New Atomizer Head in temperature controlled modes detected
If a new atomizer head is detected in in temperature controlled modes the question
"NEW LOAD+/OLD LOAD-" is displayed on the screen. Please confirm a new atomizer head by
pressing the "UP"-adjustment button or the atomizer head used before by pressing the "DOWN"
-adjustment button.
92