cecotec CERAMICCARE UNIQUE TRIANGLE Manuel D'instructions page 60

ENGLISH
4. CLEANING AND MAINTENANCE
- Unplug the appliance from the power supply and allow it to
cool down before cleaning.
- Use a soft, damp (not wet) cloth to clean the surface of the
device. Use a soft brush or a cotton swab to clean the air inlet.
- Do not immerse the device in water or other liquids.
- Do not use abrasive cleaners or scouring pads to clean the
device.
- Do not twist, bend, pull, or damage the power cable.
- Clean the dirt and hairs that may be clogging the device.
60
CERAMICCARE UNIQUE TRIANGLE
5. TROUBLESHOOTING
Problem Possible causes
It does not Check if the device is correctly plugged in.
work properly Make sure the mode knob is set to one of the switch-on
positions.
Check if the appliance switched off due to overheating.
Turn the knob to 0, unplug the appliance and allow it to
cool down.
Before turning it back on, make sure that nothing is
clogging the air inlet.