Publicité
Les langues disponibles
Les langues disponibles
(the set point is the point at which the freezer normally holds the temperature at; in rare circumstances
such as high/low room temperatures it may be necessary to adjust this slightly. Changing the factory
Function
To change the set point
Note: set point can be increased or decreased in +/‐ 0.1° increments by a MAXIMUM of 1°C
Changing the factory set point
setting is not recommended)
Press
followed by
followed by
followed by
(Increase / Decrease)
followed by
Hold button(s)
down for
3 seconds
Once
1 second
/
up to 10 times
1 second
Example screen
(current set point)
8
Publicité
