Flex FX2231 Manuel De L'utilisateur page 17

WARNING
careful when the tool is not in use or when
carrying it at your side.
LOCK-ON/OFF BUTTON AND VARIABLE
SPEED TRIGGER SWITCH
Your tool is equipped with a Lock-on/off button,
located above the variable-speed trigger switch.
When placed in three different positions, it
performs the following functions:
Lock-off
When the lock-on/off button located in the middle
positon, press it all the way to left side, at this
moment the variable-speed trigger switch, cannot
be activated any more, to help prevent the saw
from being turned on unintentionally.
Switch on and off
To start the saw, place the variable-speed
trigger switch in the middle position, then
depress the trigger switch.
To stop the saw, release the variable-speed
trigger switch.
The variable-speed trigger switch delivers higher
speed with increased trigger pressure and lower
speed with decreased trigger pressure.
NOTE: The variable speed trigger switch
functions as an on/off switch only in "A" preset.
Lock-on
With the trigger switch depressed, press the
LED WORK LIGHT ( FIG. 23)
Your tool is equipped with two LED work lights
located on the front of the tool. The lights
provide additional illumination of the workpiece
surface for operation in lower-light areas.
Press the LED switch to turn the lights on. The
lights will stay on for about 10 seconds. When
you turn the tool ON, the lights will turn on
automatically and remain on for as long as the
tool is ON. The light will turn off after about 10
seconds of inactivity.
You can deactivate the automatic switching of
the lights by pressing the light switch to turn the
lights on and then immediately press the light
switch again to turn the lights off.
The LED light electronics feature a memory
function that remembers the last setting.
OPERATING INSTRUCTIONS
Battery tools are always in
operating condition. Be
Fig. 22
Switch On and Off
lock On/Off button all the way to the right side to
lock the trigger in the ON position. This is useful
for long term cutting operations. To release the
lock-on function, depress the variable-speed
trigger switch again. The lock-on/off button will
automatically return to the middle position.
Fig. 23
LED
Switch
LED Work Lights
-17-
Lock-off
Lock-on