MHZ PowerView Hub Mode D'emploi page 9

PowerView®
CONNECTING THE HUB
CONNECT THE HUB TO
THE USB POWER SUPPLY UNIT.
CONNECT THE HUB TO
A POWER SOCKET.
Note:
During the start-up process, the LED on the hub can
fl ash on and off. Once the hub has completed the process,
the hub LED will glow magenta continuously. Do not inter-
rupt the start-up process by disconnecting the power supply
or pressing the buttons on the back of the hub.
16
All manuals and user guides at all-guides.com
EN
CONNECTION VIA WI-FI:
Open the PowerView® app on your smartphone or tablet.
Follow the on-screen instructions to connect the hub to
your Wi-Fi network. Once the hub is connected to the
home network, it indicates that it is ready to join the Power-
View® network.
CONNECTION VIA ETHERNET CABLE (OPTIONAL):
Caution:
When adding the hub to your home network/
LAN via Ethernet, you should fi rst connect the hub to the
router and then to the power supply.
Connect the Ethernet cable to the hub and a LAN port on
your router.
PowerView® app:
all subsequent steps are
explained in the PowerView app
EN
17