Quick Operation - Dexton Riff Manuel D'utilisation

4.2 Quick operation

a. Plug in the cleaner using the supplied adapter and charging line to charge the battery.
* Power off the cleaner before charging.
* Clean the charging port before charging.
* Red charging indicator indicates the battery is charging.
* Green charging indicator indicates charging is finished.
b. Put the cleaner into water and let it stand horizontally for 5-6 seconds to discharge the
air inside it. Press the switch to power on the cleaner.
c. It will automatically reverse when it touches the wall.
d. The cleaner will stop running after completing the working cycle. The floating handle
can be hooked by a hook with a lengthened connecting rod, and the cleaner is pulled to the
edge of the pool.
e. Power-off operation: the buzzer will be alarming when lifting out of the pool. Press the
switch to OFF and the cleaner will be shut down. Always clean the filter tray after use.
29