Product Diagram - Sunred Rsh17 Mode D'emploi

Children should be supervised to ensure that they do not play with the appliance.
23.
The marketing concerning covering shall be visible after the heater has been installed
24.
SAVE THESE INSTRUCTIONS.
Technical specification
•
Power supply 220-240V 50-60Hz
•
Wattage 2100W
•
Net weight 3.5 kg
•
Insulation class I
•
Size ø 47.5cm X 31cm

PRODUCT DIAGRAM

BE CAREFUL
The power cord should be tide up with the chain by using the plastic band
!
provided. The power cord should not touch the edge of the heater cover.
OPERATING INSTRUCTIONS
Place the heater on a firm, level ceiling surface;
A.
The Hook on the ceiling hanging the Patio Heater must be able to undertake a weight 3 or 4 times that of the Patio Heater
B.
itself.
Place the Hook A around the Ceiling Hook and clip on any Ring of the Chain to adjust the height of the patio Heater to the
C.
Floor.
The distance between the bottom of the Patio Heater to the Floor must be over 1.8 M.
D.
Plug the Patio Heater into a grounded 240V 50Hz power outlet.
E.
Only operate the heater when it is in the upright position.
F.