Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.
Color selection button: When the light is on, press this button to choose your favorite color as
shown on remote control (Six colors)
5.
+: White warm button: press to increase the warmth in 7 steps.
6.
-: White warm button: press to reduce the warmth in 7 steps.
7.
Color selection button: When the light is on, press this button to choose your favorite colors (Total 7 colors)
8.
The light will flash automatically to the rhythm of the music.
9.
7 colors scroll automatically
10.
When you switch the unit on, the timer function is disabled and the light works normally.
If you press the button once, the unit lights up in RED during 30 minutes and switches off the light and the
Bluetooth function.
If you press the button twice, the light will light GREEN during 60 minutes. Then, the light and the Bluetooth
function will switch off.
If you press the button 3 times the light will light DARK BLUE during 90 minutes. Then, the light and the Bluetooth
function will switch off.
If you press the button 4 times the light will light YELLOW during 120 minutes. Then, the light and the Bluetooth
function will switch off.
If you press the button 5 times the light will light DARK GREEN during 150 minutes. Then, the light and the
Bluetooth function will switch off.
If you press the button 6 times the light will light VIOLET during 180 minutes. Then, the light and the Bluetooth
function will switch off.
Switch off the lamp to turn off the timer function.
11.
Previous button: When the Bluetooth is on, press this button to select previous music.
12.
Next button: When the Bluetooth is on, press this button to select next music.
13.
When the music is on, press this button to pause the music, press again, play again.
14.
Voice- and +：When the music is on, press the "-" to reduce volume, press"+" to increase volume.
Mode selection by patting the lamp
You can adjust the color by slightly patting the lamp. The color will change as below. Please let an interval of 1
second between each pat. When you turn the lamp on, it will show the same color as when you switched it off
last time. In this example, the lamp was red when you switched it off.
Turn on
st
1
pat
nd
2
pat
rd
3
pat
th
4
pat
th
5
pat
th
6
pad
th
7
pat
th
8
pat
©Copyright LOTRONIC 2017
Red
Green
Blue
Yellow
Cyan
Violet
White
Colors change gradually
Return to the beginning
LED-LAMP-BT Manual
3
Publicité
Table des Matières
