WaterTech Tech Pool Blaster Volt FX-4Li Manuel De L'opérateur page 7

English
CAT006BK / P24X006
PBA002HD / P32X002
PBW022XF / P30X022XF
Specifications
Battery charger Input.........................................................................110-240V-50/60HZ, 0.3A Maximum
Battery charger Output.........................................................................................................8.4V,
Water temperature range................................................... Maximum 96°F, (35°C) Minimum 40°F, (5°C)
Operation Depth............................................................Maximum 12 ft. (3.5 m), Minimum 10 in., 0.25 m
A Charging Your Cleaner
Initial 4 hours
Recharge (After complete discharge) 4 hours
B Sealing the Battery Chamber
C Inserting the Filter Bag
D Attaching the Vacuum Head
You should remove and clean the Filter Bag following each use (Figure G.1).
Always store and charge your cleaner in a cool, dry indoor shelter.
Recharge the cleaner indoors for 4 hours after each month of inactivity.
Return non-working electrical equipment to a facility appointed by your municipality that properly recycles electrical and electronic equipment.
Do not dispose them in unsorted waste bins. For items containing removable batteries, remove batteries before disposing of the product.
1. Vacuum Head
2. Nose Cap
3. Multi Layer Filter Bag
Cleaner Body
4.
Only use the battery charger supplied with the cleaner.
Cleaning the Filter Bag
Don't scrub the bag against itself while rinsing it.
Long Term Storage
Always clean the Nose Cap and Filter Bag before storing.
Environmental Program(s), WEEE European Directive
Please respect the European Union regulations and help to protect the environment.
LC099-2S-US-EU
PBW022AP / P30X022AP
E
Attaching the Pool Pole
Turning the Cleaner ON & OFF
F
Maintenance
G
Help protect the environment.
6
5. Battery Chamber Cover
6. Charger and EU Adapter
7. All Purpose Filter Bag
1.A
Environmental Recycling Programs USA