Evolite DWT-512 Mode D'emploi page 9

The W512TR is now compatible with the world's leading wireless communication protocols, such as the Swedish
protocol or GZ protocols.
1.Set-up mode:
Press and hold the button before you power up. When you see status indicator turns into the white light,
release the button to enter the Set-up mode. In this mode you can select different transmission protocols.
Each time you press the button, you would see the status indicator changes. Choose one of the
protocols,then press and hold the button (> 1S), when you see the white light, release it to enter the use
mode.
2.Use mode:
1) Powered up and enter the Use mode;
2) If it is in Set-up mode, press and hold the button (> 1S) until you see the white light, then release it to
enter the Use mode.
The LED indicator then offers 4 colors:
Red: WiDMX protocol transmitter mode
Green: W-DMX protocol receiver mode (Swedish)
Blue: W-DMX protocol transmitter mode (Swedish)
Yellow: GZ protocol transmitter mode
2.1.In WIDMX protocol or GZ protocol, you could select different DMX Group:
1) The first time when you press the button, it will not change the color but show you the group that you
are in.
2) If you press it again it will switch to other group.
2.2.In W-DMX transmit protocol:
1) By pressing the button, the transmitter can be connected to all powered but not connected receivers
within the coverage area;
2) Press and hold (> 3S) the transmitter's button until the indicator turns red. The device will delete all the
receivers' connection within the coverage range.
2.3.In W-DMX Receive protocol:
Press and hold (> 3S) the receiver's button until the indicator turns white. The device would disconnect
with the transmitter.
In the GZ protocol, you can select different DMX groups:
1) The first time you press the button, it will not change the color but will show you the group you are in.
2) If you press it again, it will move to another group.
In the W-DMX G3 or G4 transmission protocol:
1) By pressing the button, the transmitter can be connected to all receivers powered but not connected in the coverage
area;
2) Press and hold (> 3S) the transmitter button until the indicator turns red. The device will delete all receiver
connections in the coverage area.
In the W-DMX reception protocol:
Press and hold the receiver button (> 3S) until the indicator turns white. The unit will disconnect from the
transmitter.
 Description of status indicator :
DWT-512 user guide Ver. 1.00 Page 9