Buttons For Control Box A5X; Display A5X; First Power On The Control Unit; Entering The Generic Code For The Operating Mode - Bwt Perla Pro Xs Serie Instructions De Montage Et D'utilisation

BUTTONS FOR CONTROL BOX A5X

1 To trigger one regeneration
2 Arrêter la régénération
3 Programming mode
4 To move the blinking digit
5 To change the blinking digit
Validation of the operating
6
mode

DISPLAY A5X

Electrolysis fault icon
Regeneration phases icon
Bargraph
Maintenance icon
ASS servicing icon

FIRST POWER ON THE CONTROL UNIT

When switched on the unit displays five zeroes with the first on the left flashing. It will remain in this configu-
ration until the operating mode for your appliance is entered and identified by a generic code.

ENTERING THE GENERIC CODE FOR THE OPERATING MODE

Enter the generic code for the selected operating mode. Once the 5-figure operating mode code is displayed,
Press the "hidden" button to confirm the selection. The next 2-line display states the current time and the
softener cycle programmed by default.
CAUTION : Each operating mode selection code described above corresponds to a well-defined program
in the A5X unit microprocessor.
Any code that is erroneous or that does not correspond to the list above can lead to malfunction of your
appliance and possibly to the loss of the BWT guarantee.
+
Current time
Technical manual BWT PERLA PRO XS - code P0011650B - Rev 7 - 26/10/2021
Press 5 seconds
press both keys and release
Press 5 seconds
Press by pulse
Press by pulse, of 0 at 9
Press by pulse
Time icon
Manual operation symbol
Units in liters icon
Remaining volume in liters
29