Turntable Installation - Seb -Mog21 Mode D'emploi

TURNTABLE INSTALLATION

Cleaning the cooking compartment and putting the turntable in place.
For new installations, make sure all packaging and shipping tape has been removed
from the turntable shaft. Before using the appliance to prepare food for the first time,
you will need to put the turntable in place correctly. You must clean the cooking
compartment and accessories.
1
2
Note:
1. Never use the appliance without the turntable. Make sure that it is properly engaged.
The turntable can turn clockwise or anti-clockwise.
2. Never place the glass tray upside down. The glass tray should never be restricted.
3. Both glass tray and turntable ring assembly must always be used during cooking.
4. All food and containers of food are always placed on the glass tray for cooking.
5. Never restrict the movement of the turntable.
6. If glass tray or turntable ring assembly cracks or breaks, contact your nearest
authorized service center.
How to put the turntable in place:
1. Place the turntable ring assembly ③ into the
recess in the cooking compartment.
2. Place the glass tray ① on the turntable ring
assembly ③. Fit the raised, curved lines in the
center of the glass tray bottom between the
three spokes of the shaft. Make sure that the
glass tray ① engages in the turntable shaft ②
in the centre of the cooking compartment
3
floor. The rollers on the shaft should fit inside
the turntable bottom ridge.
9