Kasanova KOE000037NOC Manuel D'instructions page 8

FAN HEATER
8
- The pilot light comes on.
- Select the desired speed.
- To avoid a fierce start up of the fan, it is advisable to start off from the lowest
speed position and, once the fan has been switched on, progressi¬vely
increase the speed to the desired position.
Fan Function:
- Select the fan position.
- Check that the thermostat control is turned up to the maximum.
Fan heater Function:
- Select the fan heater position.
- Select the desired heating power.
- Check that the thermostat control is positioned at the desired comfort
temperature.
Once you have finished using the appliance:
- Stop the appliance, selecting posi¬tion 0 on the selector control.
- Unplug the appliance from the mains.
Carry handle/s:
- This appliance has a handle on the upper part of the body, which facilita¬tes
comfortable transportation
Safety thermal protector:
- The appliance has a safety device, which protects the appliance from
overheating.
CLEANING
- Disconnect the appliance from the mains and allow it to cool before
undertaking any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid
and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
- Do not let water or any other liquid get into the air vents to avoid damage to
the inner parts of the appliance.
- Never submerge the appliance in water or any other liquid or place it under
running water.
- Note: When the device is started up in heating function, after being inactive
or only active in fan mode for a long period of time, it's possible that the device