Télécharger Imprimer la page

CEA GAS15/GASTONE Manuel D'installation

Publicité

Liens rapides

L. 600 mm
(1' - 11 5/8")
L. 600 mm
(1' - 11 5/8")
Ø30
(Ø1 3/16")
Ø45
(Ø1 49/64")
GAS15
59
(2 21/64")
GAS15/GASTONE
AISI 316L STAINLESS STEEL
Rubinetto d'arresto a piano, acqua calda
Deck mounted shut-off valve, hot water
DESIGN
NATALINO MALASORTI
MANUTENZIONE / MAINTENANCE
NON UTILIZZARE
G 3/8"
Questi disegni sono proprietà di CEADESIGN SRL s.u. pertanto non potranno
essere utilizzati e/o comunicati a terzi, anche in forma parziale, senza preventiva
autorizzazione. CEADESIGN SRL s.u. si riserva il diritto di apportare modifiche ai
disegni al fine di migliorare il prodotto.
CEADESIGN SRL s.u. has the property rights on these drawings, therefore they
cannot be used and/or transferred to third party, even in partial form, without any
prior authorization. Furthermore CEADESIGN SRL s.u. reserves the right to apply
any change to these drawings in order to upgrade the product.
_ REV11
acido clorico e muriatico
HCl
cloric and muriatic acid
acido fluoridrico
HF
DO NOT USE
hydrofluoric acid
ipoclorito di sodio
NaCl O
chlorine bleach
detergente a pH neutro
UTILIZZARE
pH
TO USE
7
neutral pH detergent
ceadesign.it

Publicité

loading

Sommaire des Matières pour CEA GAS15/GASTONE

  • Page 1 GAS15 Ø30 (Ø1 3/16”) (2 21/64”) _ REV11 Ø45 (Ø1 49/64”) GAS15/GASTONE AISI 316L STAINLESS STEEL Rubinetto d’arresto a piano, acqua calda Deck mounted shut-off valve, hot water DESIGN NATALINO MALASORTI L. 600 mm (1’ - 11 5/8”) L. 600 mm (1’...
  • Page 2 GAS15 _ REV11 AVVERTENZE TECNICHE Risciacquare bene le tubazioni prima del montaggio. In caso di pressioni statiche superiori a 5 bar si raccomanda Ø35 l’installazione di un riduttore di pressione per evitare danni al (Ø1 3/8”) vitone. TECHNICAL WARNINGS The pipes have to be rinsed thoroughly before installation. Use of a pressure reducer when static pressure is higher than 5 bar to avoid dammage of the shut-off valve.
  • Page 3 GAS15 RICM170 KD/Z/P/X - S/L* _ REV11 RICAMBI / SPARE PARTS RICB011 Carter / Carter RICF006 Flessibile / Hose RICH003 Ghiera / Sleeve RICM065 A/B/G/W/ RICM065 Maniglia / Handle SG/PG/BK/AB/DB* RICM170 Maniglia / Handle RICS261 A/B/G/W/ RICR040 Rosetta / Rosette RICS016 Anello di compensazione / Compensating ring SG/PG/BK/AB/DB*...