Intermec AV14 Instructions D'installation page 5

Installing the Vehicle Cradle
1
2
3
RAM vehicle
mount base
Attach the RAM vehicle mount base to the vehicle cradle
using the four button hex screws and the hex key.
Attach the RAM vehicle base to your vehicle using the
four ¼-inch-flathead hex screws and nuts.
Attach the vehicle cradle to the RAM vehicle base by placing
the mounting arm over the two bases and then tightening
the mounting arm.
Vehicle cradle
RAM vehicle
mount base
Hex screw
(4 places)
Mounting arm
RAM
vehicle base
3