AMPURE PosiCharge ProCore Edge 30 Manuel D'installation, D'utilisation Et D'entretien page 65

IOMM
Display
Message
OVP Fault
(There is a
Module
Overvoltage)
Power Stage
Initialization
Error
Ampure
Message Description
type
The battery became
Fault disconnected without
opening the pilot.
There was a CAN bus
Fault problem during power
stage initialization.
ProCore Edge 30 North America
Action(s)
Wait for the fault to clear.
Call Ampure service.
65 of 68
5912995 A01