Ga.Ma NAILS SPA essentials 7 IN 1 Manuel De L'utilisateur page 7

This appliance has been designed with a double-insulation system
for your safety.
The symbol on the product or on the package indicates that the
appliance should not be treated as normal domestic waste;
therefore, in case of disposal, it should be taken to the proper
collection point for recycling. In this way you will protect the environment
and your health from negative consequences due to improper treatment of
the product. For more detailed information, contact the municipal office,
the local waste disposal service or the shop where it was purchased.
LIMITED WARRANTY PERIOD:
Duration of warranty period: 1 or 2 years depending on customer category,
in compliance with Directive 1999/44/EC. For support service under warranty,
please take the original purchase ticket / sales receipt to the shop where
the product was purchased. The product will be repaired free of charge or
immediately replaced with similar product of equal or greater value.
10
CAUTION
Do not leave the appliance plugged in for longer than the maximum time indicated to charge it fully.
USE INSTRUCTIONS:
1. Make sure that the appliance is switched off and that the switch is on "0".
2. Connect the appliance to its adapter and then plug it into the power outlet. The LED will turn on automatically.
3. Insert the accessory you want to use according to the area to be treated.
4. Turn on the appliance by means of the on/off switch and choose a direction of rotation: to the right or the left.
5. The appliance starts to work at a medium speed. Press and hold the + key to increase speed. Release the + key to
go back to the initial setting.
6. Disconnect the adapter from the outlet once it is fully charged.
HOW TO USE ATTACHMENTS:
Shaping cone: use this attachment to eliminate dry, rough skin, hard skin or calluses on the soles of the
feet and on the heels. It is also useful for removing hard, dry skin around the nail and to soften calluses.
Felt cone: use this attachment to smooth and polish the edge of the nails after filing as well as to clean
their surface. Polish always making circular motions and do not keep the felt cone stationary on any one
point as the friction can produce a lot of heat.
11