Filex security PS310 Manuel D'utilisation page 34

User manual electronic lock PS310
4. Dual code (4 eyes principle)
4.1 Programming dual code
Make sure you programmed at least one user code (see 2.2). Make sure that the safe door is open when
you start programming the dual code (ON - master code - ENTER).
.
Step
Press ON
1.
Press Enter
2.
Press 7
3.
4. Press ENTER
Key in the master code, e.g. 567891
5.
6. Press Enter
The double code function is now activated.
4.2 Opening with dual code
The lock opens now after entering the master code (ID 0) and the user codes as programmed in chapter
4.1.
Step
1. Press ON
Key in user ID, e.g. 1
2.
3. Press Enter
Key in user code corresponding to user ID 1, e.g. 111111
4.
Press Enter
5.
Key in user ID, e.g. 2
6.
7. Press Enter
Key in within 1 minute user code corresponding to user
8.
ID 2, e.g. 222222.
Press Enter
9.
Open the handle within 5 seconds, the safe is open.
34
Action
Action
Key
ON
Enter
7
Enter
567891
Enter
Key
ON
1
Enter
111111
Enter
2
Enter
222222
Enter
Signal
Signal