Working Theory; Before Using Your New Induction Hob; Technical Specification; Operation Of Product - Haier HAMTP64MC Manuel D'instruction

2.3 Working Theory

Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by
electromagnetic fields generating heat directly in the pan, rather than indirectly through heating the
glass surface. The glass becomes hot only because the pan eventually warms it up.

2.4 Before using your New Induction Hob

 Read this guide, taking special note of the 'Safety Warnings' section.
 Remove any protective film that may still be on your Induction hob.

2.5 Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size (mm)
Building-in Dimensions (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our products we
may change specifications and designs without prior notice.
Cooking zone
1 & 2
3
4
Flexing zone
The above may vary according to the size of the pan and the material it is made from.

3. Operation of Product

3.1 Touch Controls

 The controls respond to touch, so you don't need to apply any pressure.
 Use the ball of your finger, not its tip.
The base diameter of induction cookware
Minimum
80
100
80
80
9
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
HAMTP64MC
4 Zones
220-240V~ 50Hz or 60Hz
7200W
590X520X58
560X480
Maximum
200
210
140
200*400