SPECIFICATIONS
Inputs
Connector
Digital
AES/EBU
Output
Connector
Digital
AES/EBU
Power supply :
230 Volts +/- 10 % 50/60 Hz
Size :
220 x 44 x 150 mm
Weight :
1,5 Kg
REF124 is a "SLIMRACK" unit. The FRT200 adapter can be used to integrate one or two units in 19" 1U
rack format.
Accessories for "SLIMRACK" range:
FRT100
FRT200
FRT300
INFORMATION
Warning
REF124 mains connector has three wires (2 poles + earth). Earth should imperatively be connected to
mains earth.
Never use this equipement without proper grounding.
,
Check quality of grounding.
,
Should noise or hum occurs when connected to other equipments, never disconnect grounding, use
,
insulating transformer on mains.
Never open the case without disconnecting mains
,
Avoid high temperature exposure.
,
REF124 complies with:
EN60065, EN55013, EN55020, EN60555-2, and EN60555-3, according to 73/23/EEC, 89/336/EEC
and 93/68/EEC.
Rami
Type
XLR
Balanced
Female
Type
XLR
Balanced
Female
Front panel adapter for fitting one "SLIMRACK."
Cover plate for FRT 200
Impedance
110 W
Impedance
Nominal Level
110 W
.
Rack 19" 1U front panel adapter for 2 "SLIMRACK" units.
14
Sensitivity
According to standard IEC 60958
Maximum Level
According to standard IEC 60958
Clipping
REF124