Publicité
Les langues disponibles
Les langues disponibles
1. Follow cleaning instructions 1-4 above. Make sure to disassemble and clean the fan before
storage.
2. Retain the original packaging to store your fan.
3. Always store in a dry place.
4. Never store while still plugged in.
5. Never wrap cord tightly around the fan or put any stress on the cord where it enters the fan, as it
could cause the cord to fray or break.
If your fan fails to operate, please follow these procedures:
PROBLEM
Fan is not turning on.
Oscillation function is not
working.
Fan is on but air coming
out of it is not strong
enough.
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF. DOING SO COULD
VOID THE WARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY.
63545005
FS40A-U2
STORING YOUR FAN
TROUBLESHOOTING
PROBABLE CAUSE
Fan is not plugged into a 120V
AC, 60Hz grounded
outlet/receptacle.
Breaker/fuse has been tripped.
The oscillation pin has not
been activated.
There is dust built up at the
back of the fan.
SOLUTION
Ensure unit is in the OFF position.
Plug in unit and attempt to turn on
again.
Please check your electrical box to
confirm the breaker has not been
blown. Ensure unit is in OFF
position. Plug in unit and attempt to
turn on again.
Attempt to plug unit in another
receptacle in the house.
Simply press the oscillation pin
down to start the oscillation
function. This can be done while
the fan is operating.
Turn fan OFF and unplug. Using a
soft, dry cloth, wipe the back of the
grille to remove any dust build-up.
Plug in unit and turn fan back ON to
resume normal operation.
5
Publicité
