Main Purpose And Function - Varan Motors NEGPD-03 Manuel D'utilisation

4. While lifting the machine, do not pull Throttle Switch, and carry out idle-speed operation of the
machine.
5. Non-staff shall stay away from operating area to avoid injury.
6. Select the medium speed to operate pile driver.
7. Keep the handle dry and clean without greasy oil or fuel mixture.
8. If operation is stopped midway; be sure to turn off the engine.
9. Every time, be sure to check whether fastening screws of the connector is tightened before use. If it's
loose, it's necessary to tighten the screws before use.
10. Pure gasoline (without two-stroke engine oil) is forbidden. Compound it according to the
recommended ration of fuel in Chapter 4.2 for use.
11. Gasoline is highly flammable. Therefore, replenish fuel in a well-ventilated environment. During fuel
filling, gasoline engine must be turned off.
12. Do not add too much oil. The oil shall not exceed the neck of oil filer of Fuel Tank. If fuel spills, wait
until the fuel volatilizes completely and then start the machine.
13. After refueling, tighten the oil lid. During work, check whether Fuel tank is damaged and spills
frequently. If damage is found, close down the machine immediately for replacement.
14. Reserve oil in storage areas. Remove hidden troubles of fire or open flame.
15. While pile driver is used in closed areas such as tunnels, trenches and deep groove, it's necessary to
guarantee normal air circulation to avoid waste gas poisoning and suffocation.
16. Forbid quick acceleration or braking so as not to damage the machine.
17. Before transport, empty fuel inside Fuel tank to avoid leakage.
18. Non-professional maintenance staff are prohibited from dismounting pile driver to avoid structural
damage of parts, shortened service life of pile driver or accidents.

3 Main Purpose and Function

3.1 Purpose: It can be used for outside piling operation in farms, orchard fences or barriers.
3.2 Function
3.2.1 It is a handheld gasoline pile driver which boasts light weight and low discharge capacity.
3.2.2 The product conforms to design of man-machine engineering, reduces working strength of the operator to
the greatest extent, and boasts simple and comfortable operation. The operator can achieve 360° all-around
operation.
5