-
Girare il filtro esterno in senso antiorario e rimuoverlo.
Premere il tasto "Colpo aria fredda" (5) per 5 secondi.
-
Il motore si aziona invertendo il senso di rotazione per 15 secondi, espellendo lo sporco da filtro e parti
interne. Al termine dell'operazione, rimontare il filtro (3).
PULIZIA
Staccare la spina dalla presa elettrica ed attendere il completo raffreddamento dell'apparecchio.
-
Non immergere in acqua, ma pulirlo con un panno morbido leggermente umido.
Pulire periodicamente la presa dell'aria in ingresso (3) con l'auto-pulizia.
-
CARATTERISTICHE TECNICHE
•
Alimentazione: AC 220-240V
•
Motore brushless BLDC ad alta velocità 110-000 RPM
•
3 velocità, 3 temperature, Colpo aria fredda
•
Accessori: diffusore, convogliatore, 2 coni arricciacapelli
ENGLISH: SAFETY INSTRUCTIONS
The following are important notes on the installation, use
and maintenance; save this instruction manual for future
reference; use the equipment only as specified in this
guide; any other use is considered improper and
dangerous; therefore, the manufacturer cannot be held
responsible in the event of damages caused by improper,
incorrect or unreasonable use.
Before use, ensure the equipment is undamaged; if in
doubt, do not attempt to use it and contact the authorized
service center; do not leave packing materials (i.e. plastic
bags, polystyrene foam, nails, staples, etc.) within the
reach of children as they are potential sources of danger;
always remember that they must be separately collected.
Make sure that the rating information given on the
technical label are compatible with those of the electricity
grid; the installation must be performed according to the
manufacturer's instructions considering the maximum
power of the appliance as shown on the label; an
~
50-60Hz. Potenza: 1700-2000W
8