XPower FC-100 Mode D'emploi page 6

Installation and Operation Guide
Switch Plate (Continued)
Five Speed Switch (For model FC-420 only)
• Turn to "OFF" position to switch the machine OFF. Turn to any speed position to switch
the machine ON.
• Turn clockwise to set the desired speed. There are 5 speeds from: 5, 4, 3, 2, 1. "5" is
the highest speed and "1" is the lowest speed.
Variable Speed Switch (For model FC-250D/FC-250AD only)
• Turn to "OFF" position to switch the machine OFF. Turn clock-wisely to any position
between "MAX" and "LOW" to switch the machine ON.
• You can adjust to any desired speed variably. "MAX" is the higest speed and "LOW" is
the lowest speed.
Additional Electrical Receptacle (Daisy Chain)*
CIRCUIT BREAKER
TOTAL OUTPUT
12 AMPS MAX WITH THIS UNIT OFF
10 AMPS MAX WITH THIS UNIT ON
* For model FC-250AD only.
English - 6
• Other appliances can be plugged in the
12A
additional electrical receptacles and work
whether the machine is on or off. However,
the total amperage must be lower than the
amperage instructed. Different models may
have varying instructions.
• If the machine or the plugged in appliance
stops working, press the RESET BUTTON to
reset the circuit.
(Continued)