Publicité
Les langues disponibles
Les langues disponibles
Original instructions
–
for trimming bushes, hedges and shrubs,
–
for cutting creepers,
–
for the care of lawn roofs and balcony boxes,
–
for shredding or chipping tree or hedge cuttings,
–
for clearing paths (vacuuming, blowing),
–
for levelling earth mounds, e.g. mole hills.
2. Safe Operating Procedur
2.1 General safety instructions
a. Read the operator's manual carefully and make sure you understand the
instructions before you use the product. Keep for future reference.
b. Not allow children, persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge or people unfamiliar
with these instructions to use the machine, local regulations may restrict
the age of the operator. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
supervision.
c. Do not touch moving hazardous parts, such as the blade disc, before it
has come to a complete stop.
d. The product must only be used with the equipment recommended by
SARP. All other types of use are incorrect.
e. Be aware that the operator or user is responsible for accidents or hazards
occurring to other people or their property. Do not use the product
when persons, especially children, or animals are in the work area.
f. Warning signs must be put around the work area of the product if it
operates in public areas. The signs must have the text that follows:
Warning! Automatic lawn mower! Keep away from the machine!
Supervise children!
g. Set the product to OFF before you clear a blockage, do maintenance or
examine the product, and if the product starts to vibrate abnormally.
Examine the product for damage before you start the product again. Do
not use the product if it is damaged.
2.2 Electrical Safety Instructions
a. Do not place the power cord from the outlet or the power cord from the
base in the work area. This could damage the cables.
b. When you connect the power supply to the power outlet, use a
residual-current device (RCD) with a tripping current of maximum 30 mA.
c. Do not connect a damaged cable or plug, or touch a damaged cable,
before it is disconnected from the power outlet. Disconnect the plug
from the power outlet if the cable becomes damaged while in operation.
A worn or damaged cable increases the risk of of electrical shock. A
damaged cable must be replaced by service personnel.
d. Only charge the product in the included charging station.
8
Publicité
