Kerbl IP StableCam 1081 Mode D'emploi page 30

6. Camera WLAN Setup
6.1 Automatic WLAN Setup via WPS
Press the WPS button on the camera and then press the
WPS button on the router
within 60 seconds.
The device then finds and configures itself automatically
in the WLAN.
Finished!
6.2 Manual WLAN Setup
Access your camera's IP address in the
browser (see point 3) and click on Setting.
In the menu on the configuration page,
click on Network and then on Wireless
Setup.
In the Wireless Setup settings, click on
Enable.
WPS button
on the camera
30
WPS button
on the router
IP StableCam