Saba CV169IL Mode D'emploi page 20

1. Remove the top right hinge cover
2. Unscrew and remove the hinge with a cross-slot screwdriver
GB
3. A. Return the hinge, take off the axle and fix it at the other side
B. Take off the door, then remove the door limit block and place it to
the opposite side
12
C. Remove the top left hinge cover and put it on the right side
4.
A. Disassemble the leveller
B. Unscrew the bottom right hinge
C. Install the leveller to the other side
D. Fix the bottom hinge on this opposite side
5. Reinstall the door on the hinge properly, take care about the
vertical alignment
GB GB
13