Télécharger Imprimer la page

Automated Production TC4-NVS/P Mode D'emploi page 3

Publicité

FEATURES
The TC4-NVS/P is an electronic device used for environmental control in
livestock buildings. One stage of either constant-speed fans, heaters or
mist units can be connected to the controller, as well as curtains for natural
ventilation.
The main features of the TC4-NVS/P are as follows:
A THREE DIGIT DISPLAY allows you to specify temperatures to
within one tenth of a degree (Celsius or Fahrenheit).
PILOT LIGHTS indicate the state of outputs, allowing you to moni-
tor the operation of the system without having to enter the room.
Up to FOUR INDEPENDENT TEMPERATURE PROBES can be
connected to the controller in order to obtain a more accurate read-
ing of the average room temperature and a faster reaction time.
A TEMPERATURE CURVE comprised of six different points pro-
vides an automatic adjustment of the target room temperature over
a given period of time.
A MINIMUM VENTILATION CYCLE allows you to operate the fans
continuously or intermittently when ventilation is not required for a
cooling purpose. This reduces the level of humidity and supplies
oxygen to the room. It also prevents the fans from freezing in the
winter.
An ALARM FOR EXTREME TEMPERATURES, POWER FAIL-
URES AND CIRCUIT FAULTS.
The controller can COMPENSATE CURTAIN OPENING, CLOS-
ING AND STOP TIMES ACCORDING TO ROOM TEMPERA-
TURE. The higher the temperature, the faster the curtains open
and vice versa.
Fuses located at the input and outputs of the controller provide
OVERLOAD AND OVERVOLTAGE PROTECTION and a con-
nector allows you to detect blown fuses.
TC4-NVS/P.rev.05
3

Publicité

loading