Publicité
Les langues disponibles
Les langues disponibles
cont. installation
Insert wire rope to rangehood hole as shown.
8
Secure it with countersunk screws (ST4x8mm).
Insert power cable to rangehood cover plate
10
and connect to the cables coming out of the ceiling.
2
1
Secure connected wires with insulating tape.
Re-attach the rangehood cover.
12
Make sure power cable is secured.
Loosen the cover lock nut
9
Slowly loosen adjusting screws and align rangehood
11
horizontally. Tighten the wire ropes evenly.
8
Publicité
