Hamilton Beach Commercial 8251 Manuel D'utilisation page 8

Installation Instructions
Position the dryer base over the anchors in the wall and mount
5.
the base to the wall with the two screws provided.
NOTE: Be sure the cord is still inserted into the cord slots and
is not pinched between the dryer base and the wall. Tighten the
screws until the base is securely mounted to the wall.
Insert the screw cap over the bottom screw head in the base.
6.
Plug the ALCI into the electrical outlet.
7.
Insert the hand unit into the dryer base.
8.
NOTE: If this unit will be sold or used in Quebec, Canada, attach
the enclosed French cord warning adhesive tag to the hand unit
cord next to the English tag. Do not cover the English tag.
8
(cont.)