Clean And Maintenance - Shinco SPF3-09C Manuel D'utilisation

Timer mode

In standby state, press the Timer key to set ON time. Press Up and Down keys toset
ON time (1~24H), and the timer indicator lamp lights up.

In ON state, pressure the timer key to set OFF time. Press Up and Down keys to set
OFF time (1~24H), and the timer indicator lamp lights up.

Clean and Maintenance

DRAINAGE METHOD
This product is equipped with automatic water vaporization system. The condenser
is cooled with the circulating of condensing water, so as to improve cooling
efficiency and save energy.

If the internal vessel is full of water, the display screen wil
display "FL", and
automatically. After power off, unscrew the water cover,
pull out the water wedge to drain off water, and it wil
become normal after being restarted.
MAINTENANCECE
Notice: in order to avoid electric shock, please turn off the A/C and unplug before
maintenance or repair.
CLEANING

Unplug before cleaning.

Wipe with soft semi-dry cloth. Don't use chemical reagent, such as benzene, alcohol
and gasoline etc; otherwise surface of the A/C and even the whole A/C will be
damaged.

Prevent water from spattering in the A/C.
FILTER SCREEN

Wash the filter screen once every two weeks. If it is blocked by dust, efficiency of the
A/C will be reduced.
the compressor stops working
EN
8