Climadiff EVACO2 Notice D'utilisation page 18

3. OPERATING INSTRUCTIONS
- Insert and push the stopper in silicon into the
wine bottle.
- Match the main body with the stopper.
- Rotate the lock ring, from to position ,
to start the main body to work.
- Main body pumping completed when the LCD
displays OK.
If LCD displays ERR (indicates an error), please
unlock the lock ring and re-operate.
After evacuation completed, you can start the
wine store for subsequent drinking (it requires
stored upright).
Two ways to store:
1: you can just use the stopper to store/seal the
unfinished wine bottle after using the preserver
body to vacuum the bottle. This method allows
for a shorter storage height.
2: store with body. It will automatically vacuum
when an air leak happens, as the body can
detect it anytime. Bottle storage height will be
taller.
- When you need to open the bottle, please
unlock the lock ring and pull up the main body
from the wine stopper.
- Then pull lift lever to leak the air before pulling
up the stopper.
18