Publicité
Les langues disponibles
Les langues disponibles
Attention :
* Please note that the panel should be handled with care. Please be careful not to push down on the
LCD surface with your fingers or any other object from above, as there is a risk of damaging the panel
* When installing, please be sure to handle the screws carefully to avoid dropping them.
1. Place the stand base on a flat and stable surface.
2. Slowly lift the monitor and insert the support column into the stand base until you hear a click.
3. Confirm that the monitor and stand are firmly secured.
* Forcing the stand on the back may cause damage.
* It supports tilt adjustment. Please be careful not to tip over the monitor when tilting it towards you.
* As it may be difficult to remove, please be careful not to injure yourself while working.
6
QUICK START GUIDE
Installation
How to remove the support column
While pressing [PUSH], pull out the support column.
How to remove the stand base
Grasp the tab and pull out the stand base.
PUSH
HOOK
Publicité
