Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION AND PLACEMENT
START USING
Before using your freezer, remove all packaging
materials including foam pads and tapes inside
the unit, remove the protec�ve film on the door
and the appliances' body.
The freezer should be placed in well ven�lated
indoor area, the ground should be flat and
sturdy enough to support the unit once filled.
When choosing the loca�on keep away from heat
sources and avoid direct sunlight. Do not store the
freezer in moist areas (such as garages) as this cause
the unit to rust or generate malfunc�on.
Allow sufficient clearance to insure proper air
circula�on: 30 cm (12'') at the top and 10 cm (4'') on
each sides and back of the unit.
Before connec�ng to the power so urce, let the appliance
stand for 2-3 hours.
The freezer should run 4 hours before loading fresh or
frozen foods.
9
Publicité
