Driver Installation; Package Content - i-tec Advance Série Manuel De L'utilisateur

1. Act/Link LED (Green)
Light green: Data is link.
2. RJ45 connector
3. Act/Link LED (Yellow)
Yellow flashing: Data is transmitting.
4. USB Type-A connector

DRIVER INSTALLATION

Note: DO NOT connect the Ethernet adapter to your computer before completing the installation of
driver.
*The descriptions of driver installation shown here is an example. The actual strings and screen
shots may vary slightly on each operating system.
*The driver version is subject to change due to the driver updated.

PACKAGE CONTENT

i-tec USB 2.0 Fast Ethernet Adapter
Ÿ
CD (Driver and User's manual)
Ÿ
Quick Installation Guide
Ÿ
FAQ
Question: All is OK, only Ethernet speed on adapter is displayed 10 Mbps, where is problem?
Answer: Please verify all cabling between PC/NB and active Ethernet device (hub, switch, router)
and formly plug in all RJ-45 connectors. Maybe help you exchange Ethernet cable between PC/NB
and active device for certificated one.
For more information, please refer to the User's Manual on the provided CD-ROM.
Quick Start
EN
05