Publicité
Les langues disponibles
Les langues disponibles
GB
1. Glass shelves in the fridge compartment
2. Vegetable container cover
3. Vegetable container
4. Drawers in the freezer compartment
5. Leveling feet
6. Door shelves
7. Temperature control knob with the light bulb
8. Ice cube tray
9. Scraper
BEFORE INSTALLING THE FRIDGE FREEZER
Before connecting your appliance to the power supply, check that the voltage stated on the rating label
of your appliance corresponds to the voltage in your home.
Ensure that the plug remains accessible after installation.
The appliance must be grounded. The manufacturer is not responsible for damages that may occur as a
result of usage without grounding.
INSTALLATION
Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to
direct sunlight nor near a heat source, e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on each side of
the cabinet.
For uneven surfaces, front feet can be aligned.
AMBIENT TEMPERATURE
This appliance is designed to operate in ambient temperature between 16°C and 38°C. If these
temperatures are exceeded, i.e. colder or warmer, the appliance will not operate correctly.
If the ambient temperatures are exceeded for the long periods, the temperature in the freezer
Compartment will rise above ‐18°C and food spoilage may occur.
BEFORE PLACING FOOD IN THE FRIDGE FREEZER
Remove all packaging.
Allow the appliance to run empty for 2 – 3 hours so it can cool to the appropriate temperature.
Clean the inside of the appliance with warm water and a little liquid detergent to remove
manufacturing and transportation dust.
6
Publicité
