Safety Instructions - BoomToneDJ S-1500Pro DMX Mode D'emploi

1-

Safety Instructions

WARNING
 Please keep this User Manual for future consultation. If you sell the fixture to another
user, be sure that he also receives this instruction booklet.
 Unpack and check carefully there is no transportation damage before using the
fixture.
 It's important to ground the yellow/green conductor to earth in order to avoid electric
shock.
 Disconnect main power before servicing and maintenance.
 Maximum ambient temperature is Ta : 40℃. Don't operate it where the temperature
is higher than this.
 In the event of serious operating problem, stop using the fixture immediately. Never
try to repair the fixture by yourself. Repairs carried out by unskilled people can lead
to damage or malfunction. Please contact the nearest authorized technical assistance
center. There are no user serviceable parts inside the fixture.
 Do not connect the device to any dimmer pack.
 To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to
rain or moisture.
 Do not look directly at the LED light beam while the fixture is on.

Do not touch any wire during operation .
 The unit should be mounted via its screw holes on the bracket. Always ensure that the
unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that
the structure to which you are attaching the unit is secure and is able to support a
weight of 10 times of the unit's weight. Also always use a safety cable that can hold
12 times of the weight of the unit when installing the fixture.
 The equipment must be fixed by professionals. And it must be fixed at a place where
is out of the touch of people and has no one pass by or under it.
Please read the instructions carefully which include important
information about the installation, operation and maintenance.
6
English