Cleaning - Pioneer PDK-50HW2A Mode D'emploi

CAUTION:
÷ If two or more units are operated closely together in PEN
mode, mutual interference may occur, resulting in
malfunction. If two or more units are to be used closely
together, set them all to NORMAL mode.
÷ Due to the characteristics of its scanning mode, this product
cannot be used simultaneously by two different people. If
more than one person is to operate the unit, each person
should use it separately, one person at a time. Also,
malfunction may occur if the screen is touched during input
by another hand or object besides the pen tip or fingertip
(clothes or necktie, etc.). For this reason, do not touch the
screen with objects other than the actual tip of the input
instrument (fingertip or pen tip).
÷ The pen may malfunction or input may be disrupted if the
pen is held at an excessively sharp angle to the screen. So
far as possible, hold the pen perpendicularly to the screen
during use.

CLEANING

In order to promote long life and optimum performance, regular
cleaning is recommended. Wipe the screen surface and pen tip
gently with a soft cloth to prevent dust buildup. In the case of
severe soiling, dip a soft cloth in a mild solution of a neutral
detergent, wring well, and wipe the screen surface gently, then
follow with a dry, soft cloth.
CAUTION:
÷ Always disconnect power plug from its outlet before
performing cleaning.
÷ Never use benzene, thinners or other volatile chemicals to
clean the unit, since deformation or discoloration of the unit
and pen may occur.
TROUBLESHOOTING
23
En