Publicité
Please make sure that the wiring meets the following criteria:
● The Cubo must be properly connected to the Link and the
Headrest Sensor.
● The Cubo Micro-USB and the headrest's cable must be
● The Cubo Micro-USB and the headrest's cable
Headrest and Headrest Sensor
For safety reasons we strongly recommend using the Headrest
Sensor as it has been designed to fulfil both emergency stop and
drive start functions while enabling the users to rest their head
while not driving.
tied to the frame of the wheelchair to avoid accidental
tearing or crushing by the movement of actuators.
placement has to be designed so that cables are
protected during accidental crashes if the wheelchair hits
an obstacle.
53
Publicité
