Pairing With Abluetooth Device - Skullcandy METHOD Manuel D'utilisation

04
USER GUIDE
a
b
PAIRING WITH A
BLUETOOTH DEVICE
In order to get your Method linked up with
Bluetooth capabilities, there's going to
be some small steps you'll need to take
(nothing too complicated, so don't sweat it.)
1 / / To pair Skullcandy Method, begin with
headphones in off mode. Keep phone in the
range of three feet when pairing.
2 / / Push in and hold the multi-function button a
for 6 seconds until the status light flashes
b
BLUE cop lights.
3 / / Turn on Bluetooth on mobile and find
the Bluetooth device list. Once there, choose
Skullcandy Method from the list.
4 / / Once selected, plug in the password PIN:
0000 on your phone if prompted.
5 // If required after successful pairing, select
the Skullcandy Method from the device list
and press connect.
6 / / If all has gone well, the BLUE light b
blinks once every 5 seconds.
7 / / If for some reason this process has failed,
switch off headphones and start the process
over. Once you do this once successfully,
the paired devices will recognize each other.
Unless pairing info is deleted, you shouldn't
need to pair ever again.
05
METHOD