Publicité
Les langues disponibles
Les langues disponibles
4.
Features
9 fins
thermostat
handle on top
on wheels
overheating protection
3 heat settings
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
control light
2
thermostat
3
heat settings
6.
Packaging
After packing out you must check the appliance for transport damages and missing pieces. Contact your
dealer when you notice any damage.
Do not throw away the packaging. You could use it when storing the appliance or for transportation.
Please store the packaging well. Plastic bags and other packaging materials could be dangerous for children
and pets.
7.
Operation
Before operating the heater, you must attach the feet of the appliance. Never use the appliance without the
feet.
The heater could spread out a light odor when using it for the first time. This is normal and it will be
reduced after some time of use.
Your appliance is provided with a rotating control knob:
I = minimum (800 W)
o
II = medium (1200 W)
o
III = Maximum (2000 W)
o
Rotate the thermostat knob clockwise to the desired position and switch the heater on.
When your room reaches the desired temperature, you can slowly rotate the thermostat knob counter
clockwise until the pilot light goes out. The thermostat can now be left at this setting. As soon as the room
temperature has dropped below the set temperature, the unit will switch itself on automatically until the set
temperature has been reached again. In this way the room temperature remains constant with the most
economical use of electricity.
To completely shut off the heater, turn the control knob to OFF (0), and remove the plug from the socket-
outlet.
Your appliance will be hot during some time.
8.
Overheating Protection
The appliance is provided with an overheating protection. This protection will switch off the appliance
automatically when it notices a malfunction. In this case, switch off the appliance and pull out the supply cord.
After a period of cooling down, the appliance will be ready to use again.
9.
Cleaning and Maintenance
Before any maintenance you must switch off and unplug the heater. Let it cool down because some parts
could be hot after use.
Clean the heater with a moist cloth. Do not clean it with water or submerse it in water or any other liquid.
Never use solvents like gasoline, isoamyl, acetate, toluene, etc. to clean the heater.
V. 01 – 29/03/2017
TC78009N
4
cord storage
5
handle
6
wheels
4
©Velleman nv
Publicité
