Gescasi Remock CODE Manuel De L'utilisateur page 7

6. Set/change user password
•
Tap with your palm to wake up device. Then touch the "SETTINGS" button 2 times. "MASTER" will
be displayed on the screen.
•
Enter 5-digit master password. "##" symbol will appear on the screen.
•
Touch the "7" button. "PASSWORD" will appear on the screen. Touch the "SETTINGS" to enter
menu.
• When the "MASTER" appears, touch the "LOCK" button.
•
When the "USER" appears on the screen, touch the "SETTINGS" button.
•
Enter your new 5-digit user password when "NEW PASS" is displayed on the screen. When
"REPEAT" is displayed, re-enter the 5-digit password. Thus your user password will be set/changed.
You can change the user password by following the same steps.
7. OTP – One-time Password Feature activation
•
Tap with your palm to wake up the device. Then touch the "SETTINGS" button 2 times. "MASTER"
will be displayed on the screen.
•
Enter 5-digit master password. "##" symbol will appear on the screen.
•
Touch the "0" button. "OTP" will appear on the screen. Touch the "SETTINGS" to enter menu.
•
Touch the "LOCK" to cycle through the selection, "ON" means the OTP is on, "OFF" means OTP is
off.
•
Touch the "SETTINGS" button to save your choice.
Important notice 1: in order to use the OTP feature, the master controller must me a smartphone.
Important notice 2: when OTP is activated, you need to touch "SETTINGS" twice to get inside settings
menu.
Important notice 3: to use the 5-digit password when OTP is activated press the "SETTINGS" button
once and enter your password.
8. Connect Rmagic to Rcoder
•
download for free "Remock lockey magic" application on your smartphone
available on IOS and Android
•
connect your smartphone to your "Remock magic" (see Rmagic manual)
•
turn on Bluetooth and location service on your phone
•
go to "users" → "enroll new controller" → "green +"
• Tap with your palm to wake up device. Press "1111". You are connected(phone,Rmagic,Rcoder)