Important Information; About This System; For Your Safety - Panasonic KX-HNA101C Guide D'installation

Système de réseau privé
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

About this system

R This system is an auxiliary system; it
is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.
R This system's wireless features can
be affected by various conditions
that could interfere with wireless
communications, and as such,
functionality in any or all situations
cannot be guaranteed. Panasonic
will not be held responsible for injury
or damage to property that occurs in
the event of wireless communication
error or failure.

For your safety

To prevent severe injury and loss of life/
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.
WARNING
Power connection
R Use only the power source marked
on the product.
R Do not overload power outlets. This
can result in the risk of fire or electric
shock.
R Completely insert the product into
the power outlet. Failure to do so
may cause electric shock and/or
excessive heat resulting in a fire.
R Regularly remove any dust, etc.
from the product by pulling it from
For assistance, visit www.panasonic.ca/english/support
HNA101C̲(en̲en)̲0916̲ver.022.pdf 3

Important Information

the power outlet, then wiping with a
dry cloth. Accumulated dust may
cause an insulation defect from
moisture, etc. resulting in a fire.
R Unplug the product from power
outlets if it emits smoke, an
abnormal smell, or makes an
unusual noise. These conditions can
cause fire or electric shock. Confirm
that smoke has stopped emitting
and contact us by visiting our
support page on:
www.panasonic.ca/english/
support
R Unplug from power outlets and
never touch the inside of the product
if its casing has been broken open.
Danger of electric shock exists.
R Never touch the plug with wet
hands. Danger of electric shock
exists.
R Do not connect non-specified
devices.
R Before connecting an electric device
to this product, make sure the
electric device meets the
specifications described on
page 10. Using unspecified
devices may cause fire or smoke.
Installation
R Install this product in accordance
with the provided instructions.
R To prevent the risk of fire or
electrical shock, do not expose the
product to rain or any type of
moisture.
R Do not place or use this product
near automatically controlled
devices such as automatic doors
and fire alarms. Radio waves
emitted from this product may cause
such devices to malfunction
resulting in an accident.
3
2014/09/16 20:47:46

Publicité

Chapitres

Table des Matières
loading

Table des Matières