Respirex Flo-Pod Instructions D'utilisation page 4

5. Turn on the Flo-Pod™ turbo unit using the orange
switch located on the underside of the battery
pack (Fig.3). IMPORTANT: To avoid a suffocation
hazard never attempt to wear a Flo-Pod™ hood
before switching on the Flo-Pod™ turbo unit. Wait
until a Green LED is displayed on turbo unit before
proceeding with rest of donning procedure.
Fig. 6. Switch on turbo unit
6. Open neck seal fully by loosening the drawstring
(Fig. 4).
Fig. 3. Loosen drawstring
4
ENGLISH
7. Position the hood over your head and tighten
the drawstring neck seal to a comfortable level
(Figs. 5 & 6).
Fig. 4. Position hood over head
8. The cape of the hood should be pulled downwards
and adjusted until it sits evenly on the shoulders;
the turbo unit must be positioned a maximum
distance of 4cm in front of the wearer's chin.
The position of the turbo unit can be adjusted by
pulling downwards on the ties attached to the
rear cape (Fig. 7) or by use of the battery pack
waist belt.
Fig. 5. Tighten drawstring