Publicité
Les langues disponibles
Les langues disponibles
WARNING: Do not over tighten to prevent damage to the handle and
door frame).
3) Replace the door gasket to its original position.
OPERATION
CAUTION: Before connecting the appliance to an electrical power
supply, let it stand for about 4 hours. This will reduce the possibility of
malfunctioning in the cooling system due to transport handling.
•
Before use, clean the appliance thoroughly, especially inside the
cavity (See Cleaning and Maintenance).
•
Rearrange the shelves in the cavity properly if they are not correctly
placed.
•
Make sure that the voltage in your home is compatible with the
appliance.
•
Position the appliance in a cool place, on a stable surface near a
wall outlet, with sufficient clearance on all sides to allow proper
ventilation.
•
Avoid moist and humid spaces to store or use appliance.
WARNING: Do not store or install the appliance outdoors
WARNING: Do not attempt to install the appliance into a built-in unit!
•
Plug in the appliance into an earthed wall outlet.
•
Once connected to a power source, the fans will start turning and
the wine cooler will start cooling. The cooler will need up to one and
a half hours to reach 15°C/ 60°F and up to 4 hours to reach the
temperature set up as the factory standard.
www.KALORIK.com
8
WCL 44446 - 180330
Publicité
