Section 2 - Installation; Specifications For Racks Used With Cst 250 Models; Specifications For Racks Used With Maxstar 200 Series Models; Selecting A Location - Miller Maxstar 200 Rack Mode D'emploi

2-1. Specifications For Racks Used With CST 250 Models

Input Power Input Power
To Rack To Rack
460 Or 575 Volts AC; 50/60 Hz; Three Phase

2-2. Specifications For Racks Used With Maxstar 200 Series Models

Input Power Input Power
To Rack To Rack
230 – 460 Volts AC;
50/60 Hz; Three Phase

2-3. Selecting A Location

Dimensions And Weight
166 lb (75 kg)
Movement
2
SECTION 2 – INSTALLATION
25-7/16 in
(646 mm)
Capacity Capacity
1 – 4 Welding Power Sources
Capacity Capacity
1 – 4 Welding Power Sources
48-29/32
in (1242
mm)
26-1/2 in
(673 mm)
1
1 Lifting Eye
Use lifting eye to move unit.
2 Lifting Forks
If using lifting forks, be sure forks
are fully inserted.
loc_2 3/96 - 803 167-A
OM-2238 Page 9