Télécharger Imprimer la page

SonicWALL SonicWave 224w Guide De Référence page 5

Publicité

RF Safety Distance
The antennas used for this transmitter must be installed to provide a separation distance of at least
persons and must not be co-located or operating in conjunction with another antenna or transmitter.
Cable Connections
All Ethernet and RS232 (Console) cables are designed for intra-building connection to other equipment. Do not
connect these ports directly to communication wiring or other wiring that exits the building where the appliance is
located.
Power Supply Information
When this product's power is provided by the Ethernet cable plugged into the "LAN1" port, this is called "Power
over Ethernet" or "PoE". The PoE source should only be UL listed marked "Class 2" or "LPS" with an output rated
48 VDC, minimum 0.6 A, Tma: minimum 40 degrees C.
When powering via external power adapter via barrel jack, use only UL listed power supply marked "Class 2" or
"LPS" with output rated 12Vdc, min. 1.5A, Tma: minimum 40 degrees C.
To use PoE output on LAN4 connector of the SonicWave 224w, the PoE power source to the SonicWave 224w must
be used. This PoE output can supply power to a single 802.3af compliant device (output is 48 VDC, maximum 0.3
A).
Restricted Environments
The SonicWall wireless device, like other radio devices, emits radio frequency electromagnetic energy. The
SonicWall wireless device operates within the guidelines found in radio frequency safety and recommendations.
These standards and recommendations reflect the consensus of the scientific community and result from
deliberations of panels and committees of scientists who continually review and interpret the extensive research
literature. In some situations, or environments, the use of the SonicWall wireless device may be restricted by the
proprietor of the building or responsible representatives of the applicable organization.
Examples of such situations include the following:
Using the SonicWall wireless device equipment on board airplanes, or
Using the SonicWall wireless device equipment in any other environment where the risk of interference with
other devices or services is perceived or identified as being harmful.
If you are uncertain of the policy that applies to the use of wireless devices in a specific organization or
environment (an airport, for example), you are encouraged to ask for authorization to use the SonicWall wireless
device before you turn it on.
WARNING:
Explosive Device Proximity Warning: Do not operate a portable transmitter
(such as a wireless network device) near unshielded blasting caps or in an explosive
environment unless the device has been modified to be qualified for such use.
30
SonicWall SonicWave 224w
Safety and Regulatory Information
cm from all
5

Publicité

loading

Ce manuel est également adapté pour:

Apl45-0d0