Publicité
Maintenance tips
EN
1/ Product
Properties
For outdoor use only.
The frame is made of aluminium parts, a material renowned for its lightness, strength and resis-
tance to the harshest weather conditions. Moreover, it doesn't rust.
Assembly
The manufacture and assembly of this product requires that there is a gap between the individual
parts.
As a result, gaps of up to several millimeters are generally observed between the two components.
This tolerance is necessary for the correct realization of the product and can be the cause of geo-
metrical differences.
This will not result in any loss of product functionality.
2/ Precautions for use
We cannot guarantee the durability of the product during difficult weather conditions.
It is suggested to avoid being near or under the structure in case of rainy weather.
Once a major weather event has passed, we recommend that you assess the general condition of
the structure before use.
The accumulation of water, leaves or objects on the roof contributes to its degradation and that of
the structure: make sure to clean it regularly.
We advise against heat sources and lighting on or near the structure.
3/ Maintenance
It is common for the product to show natural wear with time and use, resulting in deterioration of
the colours and surface finishes, mechanical functions and tightening of the elements.
UV exposure
It's normal for materials such as paints to become discoloured by UV light.
Each ray of sunlight or moonlight creates a new variation in the substance.
Colours normally wear out due to exposure to the outside world.
Tightening
Your product needs regular maintenance to remain functional. Doing these repairs yourself on
a regular basis can improve the longevity of the product. Remember to tighten the components
regularly.
Regular maintenance
39
Publicité
